To clean the mattress, proceed exactly the same as how you clean the sofa. Use the triangle brush and the white anti-scratch cloth. Then slowly move back and forth to remove bacteria, dirt and dust.

To clean grout and tiles, proceed as follows:

1. Use a small brush. Snap it onto the jet nozzle (see instructions).

2. Then scrub back and forth across the surface to be cleaned.

3. Do you have heavy stubborn dirt and not everything is removed? Then you can always use some bleach. Do this only as a last resort.

4. Enjoy your clean joints!

You can use the steam cleaner to clean different types of sofas, but it is important to consider the material of the sofa. Here are a few guidelines:

Suitable for steam cleaning:

1. Fabric sofas
2. Microfiber sofas

Not suitable or careful with:

1. Leather and suede sofas
2. Fleece sofas
3. Wood or metal parts

Tips for safe use:

• Test first:Always try the steam cleaner on an inconspicuous part of the sofa first to see how the material reacts.
• Drying time: Make sure the sofa is allowed to dry properly after cleaning to avoid mold growth.
• Accessories: Use the appropriate attachments (triangle brush and white anti-scratch cloth) and keep the steam cleaner moving to avoid getting the fabric too wet.

Suitable for steam cleaning:

1. Synthetic carpets
2. Short-pile or flat-woven carpets
3. Stain-resistant carpets
4. Short-pile or flat-woven carpets

Carpet with a low pile can be steam cleaned more easily because moisture does not soak as deeply into the fibers.

Stain-resistant carpets

Carpets with a special coating or impregnation for stain protection are usually suitable, but check the manufacturer's recommendations.

Loose dirt can be removed with water and dish soap. To disinfect the brushes, put them in boiling water for 5 minutes. Bacteria will be killed. The anti-scratch cloth and mop pads can be washed at 60 degrees.

No, steam and sealant edges are not a match. This is because the high steam pressure removes the sealant edge. Always try to clean sealant edges with a soft cloth.

To clean windows with the steam cleaner, proceed as follows:

1. Snap the triangle brush and white cloth onto the gun.

2. Then clean the entire window with the white cloth.

3. Then click the window puller onto the gun. Please note:do not use steam while pulling. Or else the window will remain wet.

Hold the squeegee at a slight angle to the window instead of dead straight. This will prevent streaks. Now pull the entire window dry.

This is not a defect, but tells you after heating up that the boiler is keeping the water hot. So you don't need to look at this once after heating up.